[Docs] [txt|pdf] [Tracker] [Email] [Nits] [IPR]

Versions: 00 01 draft-ietf-dkim-base

pre-MASS                                                       E. Allman
Internet-Draft                                            Sendmail, Inc.
Expires:  January 10, 2006                                     J. Callas
                                                         PGP Corporation
                                                               M. Delany
                                                               M. Libbey
                                                              Yahoo! Inc
                                                               J. Fenton
                                                               M. Thomas
                                                     Cisco Systems, Inc.
                                                            July 9, 2005


                   DomainKeys Identified Mail (DKIM)
                       draft-allman-dkim-base-00

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on January 10, 2006.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   DomainKeys Identified Mail (DKIM) defines a domain-level



Allman, et al.          Expires January 10, 2006                [Page 1]


Internet-Draft                    DKIM                         July 2005


   authentication framework for email using public-key cryptography and
   key server technology to permit verification of the source and
   contents of messages by either Mail Transport Agents (MTAs) or Mail
   User Agents (MUAs).  The ultimate goal of this framework is to prove
   and protect message sender identity and the integrity of the messages
   they convey while retaining the functionality of Internet email as it
   is known today.  Proof and protection of email identity, including
   repudiation and non-repudiation, may assist in the global control of
   "spam" and "phishing".

Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

(Unresolved Issues/To Be Done)

   Security Considerations needs further work.

   Need to add new and check existing ABNF.

   Need to resolve remaining cross references (XINDX)

CONVERSION DISCLAIMER

   This initial version that is being submitted as an IETF Internet-
   Draft has been converted over to RFC format by Dave Crocker.  Besides
   the many rough edges to the resulting format of the document, he
   suspects there also might be some more serious errors, such as sub-
   sections being at the wrong level.  These errors will be repaired as
   soon as they are reported.



















Allman, et al.          Expires January 10, 2006                [Page 2]


Internet-Draft                    DKIM                         July 2005


Table of Contents

   1.   Introduction . . . . . . . . . . . . . . . . . . . . . . . .   5
     1.1  Overview . . . . . . . . . . . . . . . . . . . . . . . . .   5
     1.2  Signing Identity . . . . . . . . . . . . . . . . . . . . .   6
     1.3  Scalability  . . . . . . . . . . . . . . . . . . . . . . .   6
     1.4  Simple Key Management  . . . . . . . . . . . . . . . . . .   6
   2.   Terminology and Definitions  . . . . . . . . . . . . . . . .   7
     2.1  Signers  . . . . . . . . . . . . . . . . . . . . . . . . .   7
     2.2  Verifiers  . . . . . . . . . . . . . . . . . . . . . . . .   7
     2.3  Imported ABNF tokens . . . . . . . . . . . . . . . . . . .   7
     2.4  White Space  . . . . . . . . . . . . . . . . . . . . . . .   7
   3.   Protocol Elements  . . . . . . . . . . . . . . . . . . . . .   8
     3.1  Selectors  . . . . . . . . . . . . . . . . . . . . . . . .   8
     3.2  Tag=Value Format for DKIM header fields  . . . . . . . . .   9
     3.3  Signing and Verification Algorithms  . . . . . . . . . . .  11
     3.4  Canonicalization . . . . . . . . . . . . . . . . . . . . .  12
     3.5  The DKIM-Signature header field  . . . . . . . . . . . . .  16
     3.6  The Authentication-Results  header field . . . . . . . . .  21
     3.7  Key Management and Representation  . . . . . . . . . . . .  21
   4.   Semantics of Multiple Signatures . . . . . . . . . . . . . .  23
   5.   Signer Actions . . . . . . . . . . . . . . . . . . . . . . .  24
     5.1  Determine if the Email Should be Signed and by Whom  . . .  24
     5.2  Select a private-key and corresponding selector
          information  . . . . . . . . . . . . . . . . . . . . . . .  25
   6.   Verifier Actions . . . . . . . . . . . . . . . . . . . . . .  29
     6.1  Introduction . . . . . . . . . . . . . . . . . . . . . . .  29
     6.2  Extract the Signature from the Message . . . . . . . . . .  29
     6.3  Get the Public Key . . . . . . . . . . . . . . . . . . . .  30
     6.4  Compute the Verification . . . . . . . . . . . . . . . . .  31
     6.5  Apply Sender Signing Policy  . . . . . . . . . . . . . . .  33
     6.6  Interpret Results/Apply Local Policy . . . . . . . . . . .  33
   7.   Compliance . . . . . . . . . . . . . . . . . . . . . . . . .  35
   8.   IANA Considerations  . . . . . . . . . . . . . . . . . . . .  35
   9.   Security Considerations  . . . . . . . . . . . . . . . . . .  35
     9.1  Misuse of Body Length Limits ("l=" Tag)  . . . . . . . . .  35
     9.2  Misappropriated Private Key  . . . . . . . . . . . . . . .  36
     9.3  Key Server Denial-of-Service Attacks . . . . . . . . . . .  37
     9.4  Attacks Against DNS  . . . . . . . . . . . . . . . . . . .  37
     9.5  Replay Attacks . . . . . . . . . . . . . . . . . . . . . .  38
     9.6  Limits on Revoking Key Authorization . . . . . . . . . . .  38
     9.7  Intentionally malformed Key Records  . . . . . . . . . . .  38
     9.8  Intentionally Malformed DKIM-Signature header fields . . .  39
   10.  References . . . . . . . . . . . . . . . . . . . . . . . . .  39
     10.1   References -- Normative  . . . . . . . . . . . . . . . .  39
     10.2   References -- Informative  . . . . . . . . . . . . . . .  40
        Authors' Addresses . . . . . . . . . . . . . . . . . . . . .  40
   A.   Appendix A -- Usage Examples (INFORMATIVE) . . . . . . . . .  42



Allman, et al.          Expires January 10, 2006                [Page 3]


Internet-Draft                    DKIM                         July 2005


     A.1  Simple message transfer  . . . . . . . . . . . . . . . . .  42
     A.2  Outsourced business functions  . . . . . . . . . . . . . .  42
     A.3  PDAs and Similar Devices . . . . . . . . . . . . . . . . .  43
     A.4  Mailing Lists  . . . . . . . . . . . . . . . . . . . . . .  43
     A.5  Affinity Addresses . . . . . . . . . . . . . . . . . . . .  43
     A.6  Third-party Message Transmission . . . . . . . . . . . . .  44
   B.   Appendix B -- Example of Use (INFORMATIVE) . . . . . . . . .  44
     B.1  The user composes an email . . . . . . . . . . . . . . . .  44
     B.2  The email is signed  . . . . . . . . . . . . . . . . . . .  45
     B.3  The email signature is verified  . . . . . . . . . . . . .  46
   C.   Appendix C -- Creating a public key (INFORMATIVE)  . . . . .  47
   D.   Glossary . . . . . . . . . . . . . . . . . . . . . . . . . .  48
   E.   Acknowledgements . . . . . . . . . . . . . . . . . . . . . .  48
        Intellectual Property and Copyright Statements . . . . . . .  49





































Allman, et al.          Expires January 10, 2006                [Page 4]


Internet-Draft                    DKIM                         July 2005


1.  Introduction

1.1  Overview

   DomainKeys Identified Mail (DKIM) defines a simple, low cost, and
   effective mechanism by which cryptographic signatures can be applied
   to email messages, to demonstrate that the sender of the message was
   authorized to use a given email address.  Message recipients can
   verify the signature by querying the signer's domain directly to
   determine whether the key that was used to sign the message was
   authorized by that domain for that address.  This confirms that the
   message was sent by a party authorized to use the signer's email
   address.

   The approach taken by DKIM differs from previous approaches to
   message signing (e.g.  S/MIME, OpenPGP) in that:

   o  the message signature is written to the message header fields so
      that neither human recipients nor existing MUA software are
      confused by signature-related content appearing in the message
      body

   o  there is no dependency on public and private key pairs being
      issued by well-known, trusted certificate authorities

   o  there is no dependency on the deployment of any new Internet
      protocols or services for public key distribution or revocation.

   DKIM:

   o  is transparent and compatible with the existing email
      infrastructure

   o  requires minimal new infrastructure

   o  can be implemented independently of clients in order to reduce
      deployment time

   o  does not require the use of a trusted third party (such as a
      certificate authority or other entity) which might impose
      significant costs or introduce delays to deployment

   o  can be deployed incrementally.

   Just as an email administrator, by creating an email account, gives a
   user the ability to receive mail sent to a given address, DKIM allows
   that administrator to constrain the use of that account when sending
   email.  The administrator can delegate the use of an address in



Allman, et al.          Expires January 10, 2006                [Page 5]


Internet-Draft                    DKIM                         July 2005


   several ways.  The administrator could operate a mail transfer agent
   (MTA) or mail submission agent (MSA) for the domain that
   authenticates the signer when accepting a message.  This MTA or MSA
   would typically have a private key that is authorized to send mail
   for anyone in the domain.  Alternatively, the administrator could
   register a public key for the signer with which, assuming the sender
   has an MTA or MUA with the appropriate software and the corresponding
   private key, the sender could sign their own outgoing messages.  In
   the latter case, the private key would typically be authorized for
   one or more specific email addresses that the sender is authorized to
   use.

   A "selector" mechanism allows multiple keys per domain, including
   delegation of the right to authenticate a portion of the namespace to
   a trusted third party.

1.2  Signing Identity

   DKIM separates the question of the signer of the message from the
   purported author of the message.  In particular, a signature includes
   the identity of the signer.  Recipients can use the signing
   information to decide how they want to process the message.

      INFORMATIVE RATIONALE:  The signing address associated with a DKIM
      signature is not required to match a particular header field
      because of the broad methods of interpretation by recipient mail
      systems, including MUAs.


1.3  Scalability

   The email identification problem is characterized by extreme
   scalability requirements.  There are currently on the order of 70
   million domains and a much larger number of individual addresses.  It
   is important to preserve the positive aspects of the current email
   infrastructure, such as the ability for anyone to communicate with
   anyone else without introduction.

1.4  Simple Key Management

   DKIM differs from traditional hierarchical public-key systems in that
   no key signing infrastructure is required; the verifier requests the
   public key from the claimed signer directly.

   The DNS is proposed as the initial mechanism for publishing public
   keys.  DKIM is specifically designed to be extensible to other key
   fetching services as they become available.




Allman, et al.          Expires January 10, 2006                [Page 6]


Internet-Draft                    DKIM                         July 2005


2.  Terminology and Definitions

2.1  Signers

   Elements in the mail system that sign messages are referred to as
   signers.  These may be MUAs, MSAs, MTAs, or other agents such as
   mailing list exploders.  In general any signer will be involved in
   the injection of a message into the message system in some way.  The
   key issue is that a message must be signed before it leaves the
   administrative domain of the signer.

2.2  Verifiers

   Elements in the mail system that verify signatures are referred to as
   verifiers.  These may be MTAs, Messages Delivery Agents (MDA), or
   MUAs.  In most cases it is expected that verifiers will be close to
   an end user (reader) of the message or some consuming agent such as a
   mailing list exploder.

2.3  Imported ABNF tokens

   The following tokens are imported from other RFCs as noted.  Those
   RFCs should be considered definitive.  However, all tokens having
   names beginning with "obs-" should be excluded from this import.

   The following tokens are imported from RFC 2821:

   o  Local-part (implementation warning:  this permits quoted strings)

   o  Domain (implementation warning:  this permits address-literals)

   o  sub-domain

   The following definitions are imported from RFC 2822:

   o  WSP (space or tab)

   o  FWS (folding white space)

   o  field-name (name of a header field)

   Other tokens not defined herein are imported from RFC 2234.  These
   are mostly intuitive primitives such as SP, ALPHA, CRLF, etc.

2.4  White Space

   There are three forms of white space:




Allman, et al.          Expires January 10, 2006                [Page 7]


Internet-Draft                    DKIM                         July 2005


   o  WSP represents simple white space, i.e., a space or a tab
      character, and is inherited from RFC 2822.

   o  SWSP is streaming white space; it adds the CR and LF characters.

   o  FWS, also from RFC 2822, is folding white space.  It allows
      multiple lines to be joined separated by CRLF followed by at least
      one white space.

   Using the syntax of RFC 2234, the formal ABNF for SWSP is:


   SWSP =  CR / LF / WSP   ; streaming white space


   Other terminology is based on [ID-MAIL-ARCH].

3.  Protocol Elements

   Protocol Elements are conceptual parts of the protocol that are not
   specific to either signers or verifiers.  The protocol descriptions
   for signers and verifiers are described in later sections.

3.1  Selectors

   To support multiple concurrent public keys per signing domain, the
   key namespace is subdivided using "selectors".  For example,
   selectors might indicate the names of office locations (e.g.,
   "sanfrancisco", "coolumbeach", and "reykjavik"), the signing date
   (e.g., "january2005", "february2005", etc.), or even the individual
   user.

      INFORMATIVE IMPLEMENTERS' NOTE:  reusing a selector with a new key
      (for example, changing the key associated with a user's name)
      makes it impossible to tell the difference between a message that
      didn't verify because the key is no longer authorized versus a
      message that is actually forged.  Signers SHOULD NOT change the
      key associated with a selector.  When creating a new key, signers
      SHOULD associate it with a new selector.

   Selectors are needed to support some important use cases.  For
   example:

   o  Domains which want to authorize a partner, such as an advertising
      provider or other outsourced function, to use a specific address
      for a given duration.





Allman, et al.          Expires January 10, 2006                [Page 8]


Internet-Draft                    DKIM                         July 2005


   o  Domains which want to allow frequent travelers to send messages
      locally without the need to connect with a particular MSA.

   o  "Affinity" domains (e.g., college alumni associations) which
      provide forwarding of incoming mail but which do not operate a
      mail submission agent for outgoing mail.

   Periods are allowed in selectors and are component separators.  If
   keys are stored in DNS, the period defines sub-domain boundaries.
   Sub-selectors might be used to combine dates with locations; for
   example, "march2005.reykjavik".  This can be used to allow delegation
   of a portion of the selector name-space.

   ABNF:


   selector =      sub-domain *( "." sub-domain )


   The number of public keys and corresponding selectors for each domain
   are determined by the domain owner.  Many domain owners will be
   satisfied with just one selector whereas administratively distributed
   organizations may choose to manage disparate selectors and key pairs
   in different regions or on different email servers.

   Beyond administrative convenience, selectors make it possible to
   seamlessly replace public keys on a routine basis.  If a domain
   wishes to change from using a public key associated with selector
   "january2005" to a public key associated with selector
   "february2005", it merely makes sure that both public keys are
   advertised in the public-key repository concurrently for the
   transition period during which email may be in transit prior to
   verification.  At the start of the transition period, the outbound
   email servers are configured to sign with the "february2005" private-
   key.  At the end of the transition period, the "january2005" public
   key is removed from the public-key repository.

   While some domains may wish to make selector values well known,
   others will want to take care not to allocate selector names in a way
   that allows harvesting of data by outside parties.  E.g., if per-user
   keys are issued, the domain owner will need to make the decision as
   to whether to make this selector associated directly with the user
   name, or make it some unassociated random value, such as the
   fingerprint of the public key.

3.2  Tag=Value Format for DKIM header fields

   DKIM uses a simple "tag=value" syntax in several contexts, including



Allman, et al.          Expires January 10, 2006                [Page 9]


Internet-Draft                    DKIM                         July 2005


   in messages, domain signature records, and policy records.

   Values are a series of strings containing either base64 text, plain
   text, or quoted printable text, as defined in [RFC2045], section 6.7.
   The name of the tag will determine the encoding of each value.  In
   general, the plain text type SHOULD be used if it is not permissible
   to have 8 bit and/or syntactically problematic characters (such as
   semicolon).  Binary forms MUST be encoded as base64, and free form
   text (e.g., user supplied) MUST be typed as quoted printable.

   Formally, the syntax rules are:


   tag-list  =  tag-spec 0*( ";" tag-spec ) [ ";" ]
   tag-spec  =  [FWS] tag-name [FWS] "=" [FWS] tag-value [FWS]
   tag-name  =  ALPHA 0*ALNUMPUNC
   tag-value =  *VALCHAR    ; SWSP prohibited at beginning and end
   VALCHAR   =  %9 / %d32 - %d58 / %d60 - %d126
                             ; HTAB and SP to TILDE except SEMICOLON
   ALNUMPUNC =  ALPHA / DIGIT / "-"
                             ; alphanumeric plus hyphen.


   Note that WSP is allowed anywhere around tags; in particular, WSP
   between the tag-name and the "=", and any WSP before the terminating
   ";" is not part of the value.

      INFORMATIVE ADVICE:  in some cases space might be limited for
      storing tag-lists; notably, keys stored in DNS.  For this reason,
      tag-values that have length constraints SHOULD have single-
      character tag names.

   Tags MUST be interpreted in a case-sensitive manner.  Values MUST be
   processed as case sensitive unless the specific tag description of
   semantics specifies case insensitivity.

   Duplicate tags MUST NOT be specified within a single tag-list.

   Whitespace within a value MUST be retained unless explicitly excluded
   by the specific tag description.

   Tag=value pairs that represent the default value MAY be included to
   aid legibility.

   Unrecognized tags MUST be ignored.

   Tags that have an empty value are not the same as omitted tags.  An
   omitted tag is treated as having the default value; a tag with an



Allman, et al.          Expires January 10, 2006               [Page 10]


Internet-Draft                    DKIM                         July 2005


   empty value explicitly designates the empty string as the value.  For
   example, "g=" does not mean "g=*", even though "g=*" is the default
   for that tag.

3.3  Signing and Verification Algorithms

   DKIM supports multiple key signing/verification algorithms.  The only
   algorithm defined by this specification at this time is rsa-sha1,
   which is the default if no algorithm is specified and which MUST be
   supported by all implementations.

3.3.1  The rsa-sha1 Signing Algorithm

   The rsa-sha1 Signing Algorithm computes a SHA-1 hash of the message
   header field and body as described in section XINDX below.  That hash
   is then encrypted by the signer using the RSA algorithm and the
   signer's private key.  The hash MUST NOT be truncated or converted
   into any form other than the native binary form before being signed.

   More formally, the algorithm for the signature using rsa-sha1 is:


   RSA(SHA1(canon_message, DKIM-SIG), key)


   where canon_message is the canonicalized message header and body as
   defined in Section 3.4 and DKIM-SIG is the canonicalized DKIM-
   Signature header field sans the signature value itself.

3.3.2  Other algorithms

   Other algorithms MAY be defined in the future.  Verifiers MUST ignore
   any signatures using algorithms that they do not understand.

3.3.3  Key sizes

   Selecting appropriate key sizes is a trade-off between cost,
   performance and risk.  All implementations MUST support keys of sizes
   512, 768, 1024, 1536 and 2048 bits and MAY support larger keys.

   Factors that should influence the key size choice include:

   o  The practical constraint that a 2048 bit key is the largest key
      that fits within a 512 byte DNS UDP response packet

   o  The security constraint that keys smaller than 1024 bits are
      subject to brute force attacks.




Allman, et al.          Expires January 10, 2006               [Page 11]


Internet-Draft                    DKIM                         July 2005


   o  Larger keys impose higher CPU costs to verify and sign email

   o  Keys can be replaced on a regular basis, thus their lifetime can
      be relatively short

   o  The security goals of this specification are modest compared to
      typical goals of public-key systems


3.4  Canonicalization

   Empirical evidence demonstrates that some mail servers and relay
   systems modify email in transit, potentially invalidating a
   signature.  There are two competing perspectives on such
   modifications.  For most signers, mild modification of email is
   immaterial to the authentication status of the email.  For such
   signers a canonicalization algorithm that survives modest in-transit
   modification is preferred.

   Other signers however, demand that any modification of the email --
   however minor -- results in an authentication failure.  These signers
   prefer a canonicalization algorithm that does not tolerate in-transit
   modification of the signed email.

   To satisfy both requirements, two canonicalization algorithms are
   defined:  a "simple" algorithm that tolerates almost no modification
   and a "nowsp" algorithm that tolerates common modifications as white-
   space replacement and header field line re-wrapping.  A signer MAY
   specify either algorithm when signing an email.  If no
   canonicalization algorithm is specified by the signer, the "simple"
   algorithm is used.  A verifier MUST be able to process email using
   either canonicalization algorithm.  Further canonicalization
   algorithms MAY be defined in the future; verifiers MUST ignore any
   signatures that use unrecognized canonicalization algorithms.

   Canonicalization simply prepares the email for presentation to the
   signing or verification algorithm.  It MUST NOT change the
   transmitted data in any way.

   In all cases, the header field of the message is presented to the
   signing algorithm first in the order indicated by the signature
   header field.  Only header fields listed as signed in the signature
   header field are included.  The CRLF separating the header field from
   the body is then presented.  Canonicalization of header fields and
   body are described below.






Allman, et al.          Expires January 10, 2006               [Page 12]


Internet-Draft                    DKIM                         July 2005


3.4.1  The "simple" canonicalization algorithm

   o  Ignore all empty lines at the end of the message body.  An empty
      line is a line of zero length after removal of the line
      terminator.

   o  Make no further changes to either the header field or the body.
      In particular, no white space should be ignored other than as
      described above.


3.4.2  The "nowsp" canonicalization algorithm

   The "nowsp" algorithm ignores all white space from all lines and
   unwraps header field continuation lines.  These rules MUST be applied
   in order.

   o  Unwrap header field continuation lines so that individual header
      fields are processed as a single line.  Only folding line
      terminators (CRLF followed by white space) should be removed
      during this step; in particular, implementations MUST NOT remove
      the colon between the header field name and header field value and
      MUST NOT remove the terminating CRLF on individual header fields.

   o  Map all header field names (not the header field contents) to
      lower case.  For example, convert "SUBJect:  AbC" to "subject:
      AbC".

   o  Ignore all SWSP in the body.  SWSP is defined in [XINDX].  Line
      terminators have no special significance here; in particular, CR
      and LF MUST be ignored when computing the signature.

   o  Ignore all SWSP in header fields except for the trailing CRLF.
      That is, the signing algorithm processes a single CRLF between
      each header field and two CRLFs between the end of the last header
      field signed and the body.

      INFORMATIVE RATIONALE:  header fields are often rewrapped during
      transmission, especially at gateways.  Some bodies will get
      wrapped to obey line length limits; eliminating all SWSP allows
      wrapping even at arbitrary points.

      INFORMATIVE EXAMPLE:  A message reading:








Allman, et al.          Expires January 10, 2006               [Page 13]


Internet-Draft                    DKIM                         July 2005


   A: <SP> X <CRLF>
   B: <SP> Y <CRLF>
    <SP> Z <CRLF>
   <CRLF>
   C <CRLF>
   D <SP><TAB><SP> E <CRLF>


      is canonicalized to:


   a:X<CRLF>b:YZ<CRLF><CRLF>CDE


   After the body is processed, a single CRLF followed by the "DKIM-
   Signature" header field being created or verified is presented to the
   algorithm.  The contents of the "b=" tag, if any, MUST be deleted,
   and the header field must be canonicalized according to the algorithm
   that is specified in the "c=" tag.  Any final CRLF on the "DKIM-
   Signature" header field MUST NOT be included in the signature
   computation.

      INFORMATIVE DISCUSSION:  Some parties have proposed extending the
      "nowsp" algorithm to also remove the leading ">" on all lines
      beginning ">From " (six characters, including a trailing space).
      This is not included in this specification because of (a) the
      additional complexity required in the algorithm and (b) a lack of
      clear understanding of whether this transformation happens
      primarily during message transmission or primarily during storage
      in a UNIX V7-style local mailbox.  Evidence indicates that such
      munging during transmission is rare at this time.


3.4.3  Body Length Limits

   A body length count MAY be specified to limit the signature
   calculation to an initial prefix of the body text.  If the body
   length count is not specified then the entire message body is signed
   and verified.

      INFORMATIVE IMPLEMENTATION NOTE:  The l= tag could be useful in
      increasing signature robustness when sending to a mailing list
      that both modifies content sent to it and does not sign its
      messages.  However, using the l= tag enables a replay attack in
      which a sender with malicious intent modifies a message to include
      content that solely benefits the attacker.  It is possible for the
      appended content to completely replace the original content in the
      end recipient's eyes and to defeat duplicate message detection



Allman, et al.          Expires January 10, 2006               [Page 14]


Internet-Draft                    DKIM                         July 2005


      algorithms.  To avoid this attack, signers should be wary of using
      this tag, and verifiers might wish to ignore the tag or remove
      text that appears after the specified content length.

   The body length count allows the signer of a message to permit data
   to be appended to the end of the body of a signed message.  The body
   length count is made following the canonicalization algorithm; for
   example whitespace characters MUST NOT be included in the count when
   using the "nowsp" algorithm.

      INFORMATIVE RATIONALE:  This capability is provided because it is
      very common for mailing lists to add trailers to messages (e.g.,
      instructions how to get off the list).  Until those messages are
      also signed, the body length count is a useful tool for the
      verifier since it MAY as a matter of policy accept messages having
      valid signatures with extraneous data.

   Signers of MIME messages that include a body length count SHOULD be
   sure that the length extends to the closing MIME boundary string.

      INFORMATIVE IMPLEMENTATION NOTE:  A signer wishing to ensure that
      the only acceptable modifications are to add to the MIME postlude
      would use a body length count encompassing the entire final MIME
      boundary string, including the final "--CRLF".  A signer wishing
      to allow additional MIME parts but not modification of existing
      parts would use a body length count extending through the final
      MIME boundary string, omitting the final "--CRLF".

   A body length count of zero means that the body is completely
   unsigned.

   Note that verifiers MAY choose to reject or truncate messages that
   have body content beyond that specified by the body length count.

      INFORMATIVE IMPLEMENTATION ADVICE:  Signers wishing to ensure that
      no modification of any sort can occur SHOULD specify the "simple"
      algorithm and no body length count.

   Despite the measures described above, some messages, particularly
   those containing 8-bit data, could be subject to modification in
   transit invalidating the signature.  Messages containing 8-bit data
   SHOULD be converted to MIME format prior to signing, using a suitable
   content transfer-encoding such as quoted-printable or base64.  Such
   conversion is outside the scope of DKIM; the actual message SHOULD be
   converted to 7-bit MIME by an MUA or MSA prior to presentation to the
   DKIM algorithm.





Allman, et al.          Expires January 10, 2006               [Page 15]


Internet-Draft                    DKIM                         July 2005


3.5  The DKIM-Signature header field

   The signature of the email is stored in the "DKIM-Signature:" header
   field.  This header field contains all of the signature and key-
   fetching data.  The DKIM-Signature value is a tag-list as described
   in XINDX.

   The "DKIM-Signature:" header field SHOULD be treated as though it
   were a trace header field as defined in section 3.6 of [RFC2822], and
   hence SHOULD NOT be reordered and SHOULD be kept in blocks prepended
   to the message.  In particular, the "DKIM-Signature" header field
   SHOULD precede the original email header fields presented to the
   canonicalization and signature algorithms.

   The "DKIM-Signature:" header field is included in the signature
   calculation, after the body of the message; however, when calculating
   or verifying the signature, the b= (signature value) value MUST be
   treated as though it were the null string.  Unknown tags MUST be
   signed but MUST be otherwise ignored by verifiers.

   The encodings for each field type are listed below.  Tags described
   as quoted-printable are as described in section 6.7 of [RFC2045],
   with the additional conversion of semicolon and vertical bar
   characters to =3B and =7C, respectively.

   Tags on the DKIM-Signature header field along with their type and
   requirement status are shown below.  Valid tags are:

   v=   Version (MUST NOT be included).  This tag is reserved for future
      use to indicate a possible new, incompatible version of the
      specification.  It MUST NOT be included in the DKIM-Signature
      header field.

   a=   The algorithm used to generate the signature (plain-text;
      REQUIRED).  Signers and verifiers MUST support "rsa-sha1", an RSA-
      signed SHA-1 digest.  See section XINDX for a description of
      algorithms.

         INFORMATIVE RATIONALE:  The authors understand that SHA-1 has
         been theoretically compromised.  However, viable attacks
         require the attacker to choose both sets of input text; given a
         preexisting input (a "preimaging" attack), it is still hard to
         determine another input that produces an SHA-1 collision, and
         the chance that such input would be of value to an attacker is
         minimal.  Also, there is broad library for SHA-1, whereas
         alternatives such as SHA-256 are just emerging.  Finally, DKIM
         is not intended to have legal- or military-grade requirements.
         There is nothing inherent in using SHA-1 here other than



Allman, et al.          Expires January 10, 2006               [Page 16]


Internet-Draft                    DKIM                         July 2005


         implementer convenience.  See
         <http://www3.ietf.org/proceedings/05mar/slides/saag-3.pdf> for
         a discussion of the security issues.

   b=   The signature data (base64; REQUIRED).  Whitespace is ignored in
      this value and MUST be ignored when re-assembling the original
      signature.  This is another way of saying that the signing process
      can safely insert FWS in this value in arbitrary places to conform
      to line-length limits.  See section [XINDX (Signer Actions)] for
      how the signature is computed.

   c=   Body canonicalization (plain-text; OPTIONAL, default is
      "simple").  This tag informs the verifier of the type of
      canonicalization used to prepare the message for signing.  The
      semantics of this field is described in section XINDX above.

   d=   The domain of the signing entity (plain-text; REQUIRED).  This
      is the domain that will be queried for the public key.  This
      domain MUST be the same as or a parent domain of the "i=" tag.
      When presented with a signature that does not meet this
      requirement, verifiers MUST either ignore the signature or reject
      the message..

   h=   Signed header fields (plain-text, but see description;
      REQUIRED).  A colon-separated list of header field names that
      identify the header fields presented to the signing algorithm.
      The field MUST contain the complete list of header fields in the
      order presented to the signing algorithm.  The field MAY contain
      names of header fields that do not exist when signed; nonexistent
      header fields do not contribute to the signature computation (that
      is, they are treated as the null input, including the header field
      name, the separating colon, the header field value, and any CRLF
      terminator), and when verified non-existent header fields MUST be
      treated in the same way.  The field MUST NOT include the DKIM-
      Signature header field that is being created or verified.  Folding
      white space (FWS) MAY be included on either side of the colon
      separator.  Header field names MUST be compared against actual
      header field names in a case insensitive manner.

      ABNF:


   sig-h-tag  = "h=" *FWS hdr-name 0*( *FWS ":" *FWS hdr-name )
   hdr-name   = field-name







Allman, et al.          Expires January 10, 2006               [Page 17]


Internet-Draft                    DKIM                         July 2005


         INFORMATIVE EXPLANATION:  By "signing" header fields that do
         not actually exist, a signer can prevent insertion of those
         header fields before verification.  However, since a sender
         cannot possibly know what header fields might be created in the
         future, and that some MUAs might present header fields that are
         embedded inside a message (e.g., as a message/rfc822 content
         type), the security of this solution is not total.

         INFORMATIVE EXPLANATION:  The exclusion of the header field
         name and colon as well as the header field value for non-
         existent header fields prevents an attacker from inserting an
         actual header field with a null value.

   i=   Identity of the user or agent (e.g., a mailing list manager) on
      behalf of which this message is signed (quoted-printable;
      OPTIONAL, default is an empty local-part followed by an "@"
      followed by the domain from the "d=" tag).  The syntax is a
      standard email address where the local-part is optional.  If the
      signing domain is unable or unwilling to commit to an individual
      user name within their domain, the local-part of the address MUST
      be omitted.  If the local-part of the address is omitted or the
      "i=" tag is not present, the key used to sign MUST be valid for
      any address in the domain.  The domain part of the address MUST be
      the same as or a subdomain of the value of the "d=" tag.

      ABNF:


   sig-i-tag =     "i=" [ Local-part ] "@" Domain


         INFORMATIVE DISCUSSION:  This document does not require the
         value of the "i=" tag to match the identity in any message
         header field fields.  This is considered to be a verifier
         policy issue, described in another document [XREF-TBD].
         Constraints between the value of the "i=" tag and other
         identities in other header fields seek to apply basic
         authentication into the semantics of trust associated with a
         role such as content author.  Trust is a broad and complex
         topic and trust mechanisms are subject to highly creative
         attacks.  The real-world efficacy of any but the most basic
         bindings between the "i=" value and other identities is not
         well established, nor is its vulnerability to subversion by an
         attacker.  Hence reliance on the use of these options SHOULD be
         strictly limited.  In particular it is not at all clear to what
         extent a typical end-user recipient can rely on any assurances
         that might be made by successful use of the "i=" options.




Allman, et al.          Expires January 10, 2006               [Page 18]


Internet-Draft                    DKIM                         July 2005


   l=   Body count (plain-text decimal integer; OPTIONAL, default is
      entire body).  This tag informs the verifier of the number of
      bytes in the body of the email included in the cryptographic hash,
      starting from 0 immediately following the CRLF preceding the body.

         INFORMATIVE IMPLEMENTATION WARNING:  Use of the l= tag might
         allow display of fraudulent content without appropriate warning
         to end users.  The l= tag is intended for increasing signature
         robustness when sending to mailing lists that both modify their
         content and do not sign their messages.  However, using the l=
         tag enables man-in-the-middle attacks in which an intermediary
         with malicious intent modifies a message to include content
         that solely benefits the attacker.  It is possible for the
         appended content to completely replace the original content in
         the end recipient's eyes and to defeat duplicate message
         detection algorithms.  Examples are described in Security
         Considerations [XINDX].

         To avoid this attack, signers should be extremely wary of using
         this tag, and verifiers might wish to ignore the tag or remove
         text that appears after the specified content length.

   q=   A colon-separated list of query methods used to retrieve the
      public key (plain-text; OPTIONAL, default is "dns").  Each query
      method is of the form "type[/options]", where the syntax and
      semantics of the options depends on the type.  If there are
      multiple query mechanisms listed, the choice of query mechanism
      MUST NOT change the interpretation of the signature.  Currently
      the only valid value is "dns" which defines the DNS lookup
      algorithm described elsewhere in this document.  No options are
      defined for the "dns" query type, but the string "dns" MAY have a
      trailing "/" character.  Verifiers and signers MUST support "dns".

         INFORMATIVE RATIONALE:  Explicitly allowing a trailing "/" on
         "dns" allows for the possibility of adding options later and
         makes it clear that matching of the query type must terminate
         on either "/" or end of string.

   s=   The selector subdividing the namespace for the "d=" (domain) tag
      (plain-text; REQUIRED).

      t= Signature Timestamp (plain-text; RECOMMENDED, default is an
      unknown creation time).  The time that this signature was created.
      The format is the standard Unix seconds-since-1970.  The value is
      expressed as an unsigned integer in decimal ASCII.






Allman, et al.          Expires January 10, 2006               [Page 19]


Internet-Draft                    DKIM                         July 2005


         INFORMATIVE IMPLEMENTATION NOTE:  This value is not constrained
         to fit into a 31- or 32-bit integer.  Implementations SHOULD be
         prepared to handle values up to at least 10^12 (until
         approximately AD 200,000; this fits into 40 bits).  To avoid
         denial of service attacks, implementations MAY consider any
         value longer than 12 digits to be infinite.

   x=   Signature Expiration (plain-text; RECOMMENDED, default is no
      expiration).  Signature expiration in seconds-since-1970 format as
      an absolute date, not as a time delta from the signing timestamp.
      Signatures MUST NOT be considered valid if the current time at the
      verifier is past the expiration date.  The value is expressed as
      an unsigned integer in decimal ASCII.

         INFORMATIVE IMPLEMENTATION NOTE:  See above.

         INFORMATIVE NOTE:  The x= tag is not intended as an anti-replay
         defense.

   z=   Copied header fields (plain-text, but see description; OPTIONAL,
      default is null).  A vertical-bar-separated list of header field
      names and copies of header field values that identify the header
      fields presented to the signing algorithm.  The field MUST contain
      the complete list of header fields in the order presented to the
      signing algorithm.  Copied header field values MUST immediately
      follow the header field name with a colon separator (no white
      space permitted).  Header field values MUST be represented as
      Quoted-Printable [XREF] with vertical bars, colons, semicolons,
      and white space encoded in addition to the usual requirements.

   Verifiers MUST NOT use the copied header field values for
   verification should they be present in the h= field.  Copied header
   field values are for forensic use only.

   header fields with characters requiring conversion (perhaps from
   legacy MTAs which are not RFC 2822 compliant) SHOULD be converted as
   described in [RFC2047].

   ABNF:



   sig-z-tag    = "z=" *FWS hdr-copy *( *FWS "|" hdr-copy )
                        *FWS <hdr-copy =   hdr-name ":"
                        *FWS qp-hdr-value
   qp-hdr-value = <quoted-printable text with WS,
                    "|", ":", and ";" encoded>
                        ; needs to be updated with real definition



Allman, et al.          Expires January 10, 2006               [Page 20]


Internet-Draft                    DKIM                         July 2005


                        ; (could be messy)


      INFORMATIVE EXAMPLE of a signature header field spread across
      multiple continuation lines:

   DKIM-Signature: a=rsa-sha1; d=example.net; s=brisbane
      c=simple; q=dns; i=@eng.example.net; t=1117574938; x=1118006938;
      h=from:to:subject:date;
      z=From:foo@eng.example.net|To:joe@example.com|
        Subject:demo%20run|Date:July%205,%202005%203:44:08%20PM%20-0700
      b=dzdVyOfAKCdLXdJOc9G2q8LoXSlEniSbav+yuU4zGeeruD00lszZ
               VoG4ZHRNiYzR



3.6  The Authentication-Results  header field

   Verifiers wishing to communicate the results of verification via an
   email header field SHOULD use the Authentication-Results header field
   [ID-AUTH-RES].

3.7  Key Management and Representation

   DKIM keys do not require third party signatures by Certificate
   Authorities in order to be trusted, since the public key is retrieved
   directly from the signer.

   DKIM keys can potentially be stored in multiple types of key servers
   and in multiple formats.  The storage and format of keys are
   irrelevant to the remainder of the DKIM algorithm.

   Parameters to the key lookup algorithm are the domain of the
   responsible signer (the "d=" tag of the DKIM-Signature header field),
   the selector (the "s=" tag), and the signing identity (the "i=" tag).
   The "i=" tag value could be ignored by some key services.

   This document defines a single binding, using DNS to distribute the
   keys.

3.7.1  Textual Representation

   It is expected that many key servers will choose to present the keys
   in a text format.  The following definition MUST be used for any DKIM
   key represented in textual form.

   The overall syntax is a key-value-list as described above.  The
   current valid tags are:



Allman, et al.          Expires January 10, 2006               [Page 21]


Internet-Draft                    DKIM                         July 2005


   v=   Version of the DKIM key record (plain-text; RECOMMENDED, default
      is "DKIM1").  If specified, this tag MUST be set to "DKIM1"
      (without the quotes).  This tag MUST be the first tag in the
      response.  Responses beginning with a "v=" tag with any other
      value MUST be discarded.

   g=   granularity of the key (plain-text; OPTIONAL, default is "*").
      This value MUST match the local part of the signing address, with
      a "*" character acting as a wildcard.  The intent of this tag is
      to constrain which signing address can legitimately use this
      selector.  An email with a signing address that does not match the
      value of this tag constitutes a failed verification.  Wildcarding
      allows matching for addresses such as "user+*".  An empty "g="
      value never matches any addresses.

   h=   Acceptable hash algorithms (plain-text; OPTIONAL, defaults to
      allowing all algorithms).  A colon-separated list of hash
      algorithms that might be used.  Signers and Verifiers MUST support
      the "sha1" hash algorithm.

   k=   Key type (plain-text; OPTIONAL, default is "rsa").  Signers and
      verifiers MUST support the 'rsa' key type.

   n=   Notes that might be of interest to a human (quoted-printable;
      OPTIONAL, default is empty).  No interpretation is made by any
      program.  This tag should be used sparingly in any key server
      mechanism that has space limitations (notably DNS).

   p=   Public-key data (base64; REQUIRED).  An empty value means that
      this public key has been revoked.  The syntax and semantics of
      this tag value is defined by the k= tag.

   s=   Service Type (plain-text; OPTIONAL; default is "*").  A colon-
      separated list of service types to which this record applies.
      Verifiers for a given service type MUST ignore this record if the
      appropriate type is not listed.  Currently defined service types
      are:

      *   matches all service types

      email   electronic mail (not necessarily limited to SMTP)

         This tag is intended to permit senders to constrain the use of
         delegated keys, e.g., where a company is willing to delegate
         the right to send mail in their name to an outsourcer, but not
         to send IM or make VoIP calls.  (This of course presumes that
         these keys are used in other services in the future.)




Allman, et al.          Expires January 10, 2006               [Page 22]


Internet-Draft                    DKIM                         July 2005


   t=   Flags, represented as a colon-separated list of names (plain-
      text; OPTIONAL, default is no flags set).  The defined flags are:

      y   This domain is testing DKIM; unverified email MUST NOT be
         treated differently from verified email.  Verifier systems MAY
         wish to track testing mode results to assist the signer.

         Unrecognized flags MUST be ignored.


3.7.2  DNS binding

   A binding using DNS as a key service is hereby defined.  All
   implementations MUST support this binding.

3.7.2.1  Name Space.

   All DKIM keys are stored in a "_domainkey" subdomain.  Given a DKIM-
   Signature field with a "d=" tag of "domain" and an "s=" tag of
   "selector", the DNS query will be for "selector._domainkey.domain".

   The value of the "i=" tag is not used by the DNS binding.

3.7.2.2  Resource Record Types for Key Storage

   This section needs to be fleshed out.  ACTUALLY:  will be addressed
   in another document.

   Two RR types are used:  DKK and TXT.

   The DKK RR is expected to be a non-text, binary representation
   intended to allow the largest possible keys to be represented and
   transmitted in a UDP DNS packet.  Details of this RR are described in
   [ID-DK-RR].

   TXT records are encoded as described in section XINDX above.

   Verifiers SHOULD search for a DKIM RR first, if possible, followed by
   a TXT RR.  If the verifier is unable to search for a DKK RR or a DKK
   RR is not found, the verifier MUST search for a TXT RR.

4.  Semantics of Multiple Signatures

   Considerable energy has been spent discussion the desirability and
   semantics of multiple DKIM signatures in a single message.  On the
   one hand, discarding existing signature header fields loses
   information which could prove to be valuable in the future.  On the
   other hand, since header fields are known to be re-ordered in transit



Allman, et al.          Expires January 10, 2006               [Page 23]


Internet-Draft                    DKIM                         July 2005


   by at least some MTAs, determining the most interesting signature
   header field is non-trivial.

   Further confusion could occur with multiple signatures added at the
   same logical "depth".  For example, a signer could choose to sign
   using different signing or canonicalization algorithms.  However,
   even this is problematic because some of those signatures will
   inevitably have to sign some of the others (and at very minimum must
   be presented to the verification algorithm in the same order as
   presented to the signature algorithm).

   Also, many agents are expected to break existing signatures (e.g., a
   mailing list that modifies Subject header fields or adds unsubscribe
   information to the end of the message).  Retaining signature
   information that is known to be bad could create more problems than
   it solves.

   For these reasons, multiple signatures are not prohibited but are
   left undefined.

      INFORMATIVE IMPLEMENTATION GUIDANCE:  Agents that forward mail
      without modification could decide whether to add another signature
      or simply retain an existing signatures.  Agents that are known to
      break existing signatures MAY leave the existing signature or
      delete it.  Agents that re-sign messages that are already signed
      SHOULD verify the previous signature and should probably refuse to
      sign any critical information that failed a signature
      verification.


5.  Signer Actions

5.1  Determine if the Email Should be Signed and by Whom

   A signer can obviously only sign email for domains for which it has a
   private-key and the necessary knowledge of the corresponding public
   key and selector information.  However there are a number of other
   reasons beyond the lack of a private key why a signer could choose
   not to sign an email.

   A SUBMISSION server MAY sign if the sender is authenticated by some
   secure means, e.g., SMTP AUTH.  Within a trusted enclave the signing
   address MAY be derived from the header field according to local
   signer policy.  Within a trusted enclave an MTA MAY do the signing.

      INFORMATIVE IMPLEMENTER ADVICE:  SUBMISSION servers should not
      sign Received header fields if the outgoing gateway MTA obfuscates
      Received header fields, for example to hide the details of



Allman, et al.          Expires January 10, 2006               [Page 24]


Internet-Draft                    DKIM                         July 2005


      internal topology.

   A signer MUST NOT sign an email if the submitter is not authorized to
   use the signing address.

   A signer SHOULD NOT remove an existing "DKIM-Signature:" header field
   unless that signature was added by an entity under the same domain.
   That is, DKIM-Signature header fields SHOULD NOT be removed unless
   the d= tag of that existing DKIM-Signature header field is the same
   as or a subdomain of the d= tag of the new DKIM-Signature header
   field that is being added.

   If an email cannot be signed for some reason, it is a local policy
   decision as to what to do with that email.

5.2  Select a private-key and corresponding selector information

   This specification does not define the basis by which a signer should
   choose which private-key and selector information to use.  Currently,
   all selectors are equal as far as this specification is concerned, so
   the decision should largely be a matter of administrative
   convenience.

   A signer SHOULD NOT sign with a key that is expected to expire within
   seven days; that is, when rotating to a new key, signing should
   immediately commence with the new key and the old key SHOULD be
   retained for at least seven days before being removed from the key
   server.

5.2.1  Normalize the Message to Prevent Transport Conversions

   Some messages, notably those using 8-bit characters, are subject to
   conversion to 7-bit during transmission.  Such conversions will break
   DKIM signatures.  In order to minimize the chances of such breakage,
   signers SHOULD convert the message to MIME-encoded 7-bit form as
   described in [RFC2045] before signing.

   Should the message be submitted to the signer with any local encoding
   that will be modified before transmission, such conversion to
   canonical form MUST be done before signing.  In particular, some
   systems use local line separator conventions (such as the Unix
   newline character) internally rather than the SMTP-standard CRLF
   sequence.  All such local conventions MUST be converted to canonical
   format before signing.

   More generally, the signer MUST sign the message as it will be
   emitted on the wire rather than in some local or internal form.




Allman, et al.          Expires January 10, 2006               [Page 25]


Internet-Draft                    DKIM                         July 2005


5.2.2  Determine the header fields to Sign

   The From header field MUST be signed (that is, included in the h= tag
   of the resulting DKIM-Signature header field); any header field that
   describes the role of the signer (for example, the Sender or Resent-
   From header field if the signature is on behalf of the corresponding
   address and that address is different from the From address) MUST
   also be included.  The signed header fields SHOULD also include the
   Subject and Date header fields as well as all MIME header fields.
   Signers SHOULD NOT sign an existing header field likely to be
   legitimately modified or removed in transit.  In particular, RFC 2821
   explicitly permits modification or removal of the "Return-Path"
   header field in transit.  Signers MAY include any other header fields
   present at the time of signing at the discretion of the signer.  It
   is RECOMMENDED that all other existing, non-repeatable header fields
   be signed.

   The DKIM-Signature header field is always implicitly signed and MUST
   NOT be included in the h= tag except to indicate that other
   preexisting signatures are also signed.

   Signers MUST sign any header fields that the signers wish to have the
   verifiers treat as trusted.  Put another way, verifiers MAY treat
   unsigned header fields with extreme skepticism, up to and including
   refusing to display them to the end user.

   Signers MAY claim to have signed header fields that do not exist
   (that is, signers MAY include the header field name in the h= tag
   even if that header field does not exist in the message).  When
   computing the signature, the non-existing header field MUST be
   treated as the null string (including the header field name, header
   field value, all punctuation, and the trailing CRLF).

      INFORMATIVE RATIONALE:  This allows signers to explicitly assert
      the absence of a header field; if that header field should be
      added later the signature will fail.

   Signers choosing to sign an existing replicated header field (such as
   Received) MUST sign the physically last instance of that header field
   in the header field block.  Signers wishing to sign multiple
   instances of an existing replicated header field MUST include the
   header field name multiple times in the h= tag of the DKIM-Signature
   header field, and MUST sign such header fields in order from the
   bottom of the header field block to the top.  The signer MAY include
   more header field names than there are actual corresponding header
   fields to indicate that additional header fields of that name SHOULD
   NOT be added.  (However, header fields that can be replicated should
   not be signed; see below.)



Allman, et al.          Expires January 10, 2006               [Page 26]


Internet-Draft                    DKIM                         July 2005


      INFORMATIVE EXAMPLE:

      If the signer wishes to sign two existing Received header fields,
      and the existing header contains:



   Received: <A>
   Received: <B>
   Received: <C>


      then the resulting DKIM-Signature header field should read:



   DKIM-Signature: ... h=Received : Received : ...


      and Received header fields <C> and <B> will be signed in that
      order.

   Signers SHOULD NOT sign header fields that might be replicated
   (either at the time of signing or potentially in the future), with
   the exception of trace header fields such as Received.  Comment and
   non standard header fields (including X-* header fields) are
   permitted by [RFC2822] to be replicated; however, many such header
   fields are, by convention, not replicated.  Signers need to
   understand the implications of signing header field fields that might
   later be replicated, especially in the face of header field
   reordering.  In particular, [RFC2822] only requires that trace header
   fields retain the original order.

      INFORMATIVE RATIONALE:  Received:  is allowed because these header
      fields, as well as Resent-* header fields, are already order-
      sensitive.

      INFORMATIVE ADMONITION:  Despite the fact that [RFC2822] permits
      header field blocks to be reordered (with the exception of
      Received header fields), reordering of signed replicated header
      fields by intermediate MTAs will cause DKIM signatures to be
      broken; such anti-social behavior should be avoided.

      INFORMATIVE IMPLEMENTER'S NOTE:  Although not required by this
      specification, all end-user visible header fields should be signed
      to avoid possible "indirect spamming."  For example, if the
      "Subject" header field is not signed, a spammer can resend a
      previously signed mail, replacing the legitimate subject with a



Allman, et al.          Expires January 10, 2006               [Page 27]


Internet-Draft                    DKIM                         July 2005


      one-line spam.

      INFORMATIVE NOTE:  There has been some discussion that a Sender
      Signing Policy include the list of header fields that the signer
      always signs.  N.B. In theory this is unnecessary, since as long
      as the signer really always signs the indicated header fields
      there is no possibility of an attacker replaying an existing
      message that has such an unsigned header field.


5.2.3  Compute the Signature

   The signer MUST use one of the defined canonicalization algorithms as
   described in section XINDX to present the email to the signing
   algorithm.  Canonicalization is only used to prepare the email for
   signing; it does not affect the transmitted email in any way.

   To avoid possible ambiguity, a signer SHOULD either sign or remove
   any preexisting "Authentication-Results:" header fields from the
   email prior to preparation for signing and transmission.
   "Authentication-Results" header fields MUST only be signed if the
   signer is certain of the authenticity of the preexisting header
   field, for example, if it is locally generated or signed by a
   previous DKIM-Signature line that the current signer has verified.
   Signers MUST NOT sign Authentication-Results header fields that could
   be forgeries.

   Entities such as mailing list managers that implement DKIM and which
   modify the message or the header field (for example, inserting
   unsubscribe information) before retransmitting the message SHOULD
   check any existing signature on input and MUST make such
   modifications before re-signing the message; such signing SHOULD
   include the Authentication-Results header field, if any, inserted
   upon message receipt.

   All tags and their values in the DKIM-Signature header field are
   included in the cryptographic hash with the sole exception of the
   value of the "b=" (signature) tag, which MUST be treated as the null
   string.  All tags MUST be included even if they might not be
   understood by the verifier.  The header field MUST be presented to
   the hash algorithm after the body of the message rather than with the
   rest of the header fields and MUST be canonicalized as specified in
   the "c=" (canonicalization) tag.  The DKIM-Signature header field
   MUST NOT be included in its own h= tag.

   When calculating the hash on values that will be base64 or quoted-
   printable encoded, the hash MUST be computed after the encoding.
   Likewise, the verifier MUST incorporate the values into the hash



Allman, et al.          Expires January 10, 2006               [Page 28]


Internet-Draft                    DKIM                         July 2005


   before decoding the base64 or quoted-printable text.

   With the exception of the canonicalization procedure described in
   section XINDX, the DKIM signing process treats the body of messages
   as simply a string of characters.  DKIM messages MAY be either in
   plain-text or in MIME format; no special treatment is afforded to
   MIME content.  Message attachments in MIME format MUST be included in
   the content which is signed.

5.2.4  Insert the DKIM-Signature header field

   The final step in the signing process is that the signer MUST insert
   the "DKIM-Signature:" header field as defined in section XINDX prior
   to transmitting the email.  The "DKIM-Signature" SHOULD be inserted
   before any header fields that it signs in the header field block.

      INFORMATIVE IMPLEMENTATION NOTE:  The easiest way to achieve this
      is to insert the "DKIM-Signature" header field at the beginning of
      the header field block.


6.  Verifier Actions

6.1  Introduction

   Since a signer MAY expire a public key at any time, it is recommended
   that verification occur in a timely manner with the most timely place
   being during acceptance by the border MTA.

   A border or intermediate MTA MAY verify the message signatures and
   add a verification header field to incoming messages.  This
   considerably simplifies things for the user, who can now use an
   existing mail user agent.  Most MUAs have the ability to filter
   messages based on message header fields or content; these filters
   would be used to implement whatever policy the user wishes with
   respect to unsigned mail.

   A verifying MTA MAY implement a policy with respect to unverifiable
   mail, regardless of whether or not it applies the verification header
   field to signed messages.  Separate policies MAY be defined for
   unsigned messages, messages with incorrect signatures, and when the
   signature cannot be verified.  Treatment of unsigned messages MUST be
   based on the results of the Sender Signing Policy check described in
   [ID-DKPOLICY].

6.2  Extract the Signature from the Message

   The signature and associated signing identity is included in the



Allman, et al.          Expires January 10, 2006               [Page 29]


Internet-Draft                    DKIM                         July 2005


   value of the DKIM-Signature header field.

   Verifiers MUST ignore DKIM-Signature header fields with a "v=" tag.
   Existence of such a tag indicates a new, incompatible version of the
   DKIM-Signature header field.

   If the "DKIM-Signature" header field does not contain the "i=" tag,
   the verifier MUST behave as though the value of that tag were "@d",
   where "d" is the value from the "d=" tag (which MUST exist).

   Verifiers MUST confirm that the domain specified in the "d=" tag is
   the same as or a superdomain of the domain part of the "i=" tag.  If
   not, the DKIM-Signature header field MUST be ignored.

   Implementers MUST meticulously validate the format and values in the
   "DKIM-Signature:" header field; any inconsistency or unexpected
   values MUST result in an unverified email.  Being "liberal in what
   you accept" is definitely a bad strategy in this security context.
   Note however that this does not include the existence of unknown tags
   in a "DKIM-Signature" header field, which are explicitly permitted.

   Verifiers MUST NOT attribute ultimate meaning to the order of
   multiple DKIM-Signature header fields.  In particular, there is
   reason to believe that some relays will reorder the header field in
   potentially arbitrary ways.

      INFORMATIVE IMPLEMENTATION NOTE:  Verifiers might use the order as
      a clue to signing order in the absence of any other information.
      However, other clues as to the semantics of multiple signatures
      must be considered before using ordering.

   Since there can be multiple signatures in a message, a verifier
   SHOULD ignore an invalid signature (regardless if caused by a
   syntactic or semantic problem) and try other signatures.  A verifier
   MAY choose to treat a message with one or more invalid signatures
   with more suspicion than a message with no signature at all.

6.3  Get the Public Key

   The public key is needed to complete the verification process.  The
   process of retrieving the public key depends on the query type as
   defined by the "q=" tag in the "DKIM-Signature:" header field line.
   Obviously, a public key should only be retrieved if the process of
   extracting the signature information is completely successful.
   Details of key management are described in section XINDX.  The
   verifier MUST validate the key record and MUST ignore any public key
   records that are malformed.




Allman, et al.          Expires January 10, 2006               [Page 30]


Internet-Draft                    DKIM                         July 2005


   When validating a message, a verifier MUST:

   1.  Retrieve the public key as described under Key Management (XINDX)
       using the domain from the "d=" tag and the selector from the "s="
       tag.

   2.  If the query for the public key fails to respond, the verifier
       SHOULD defer acceptance of this email (normally this will be
       achieved with a 451/4.7.5 SMTP response code).

   3.  If the query for the public key fails because the corresponding
       RR does not exist, the verifier MUST ignore the signature.

   4.  If the result returned from the query does not adhere to the
       format defined in this specification, the verifier MUST ignore
       the signature.

   5.  If the "g=" tag in the public key does not match the local part
       of the "i=" tag on the message signature, the verifier MUST treat
       the signature as invalid.  If the local part of the "i=" tag on
       the message signature is not present, the g= tag must be * (valid
       for all addresses in the domain) or not present (which defaults
       to *), otherwise the verifier MUST ignore the signature.  Other
       than this test, verifiers MUST NOT treat a message signed with a
       key record having a g= tag any differently than one without; in
       particular, verifiers MUST NOT prefer messages that seem to have
       an individual signature by virtue of a g= tag vs. a domain
       signature.

   6.  If the "h=" tag exists in the public key record and the hash
       algorithm implied by the a= tag in the DKIM-Signature header is
       not included in the "h=" tag, the verifier MUST ignore the
       signature.

   7.  If the public key data is not suitable for use with the algorithm
       type defined by the "a=" tag in the "DKIM-Signature" header
       field, the verifier MUST ignore the signature.

   If the public key data (the "p=" tag) is empty then this key has been
   revoked and the verifier MUST treat this as a failed signature check.

6.4  Compute the Verification

   Given a signer and a public key, verifying a signature consists of
   the following steps.

   o  Based on the algorithm defined in the "c=" tag, the body length
      specified in the "l=" tag, and the header field names in the "h="



Allman, et al.          Expires January 10, 2006               [Page 31]


Internet-Draft                    DKIM                         July 2005


      tag, create a canonicalized copy of the email as is described in
      section XINDX.  When matching header field names in the "h=" tag
      against the actual message header field, comparisons MUST be case-
      insensitive.

   o  Based on the algorithm indicated in the "a=" tag,

      *  Compute the message hash from the canonical copy as described
         in section XINDX.  Note that this requires presenting the
         "nowsp" canonicalized DKIM-Signature header field to the hash
         algorithm after the body of the message, and with the "b="
         value treated as the empty string.

      *  Decrypt the signature using the signer's public key.

   o  Compare the decrypted signature to the message hash.

      INFORMATIVE IMPLEMENTER'S NOTE:  Implementations might wish to
      initiate the public-key query in parallel with calculating the
      hash as the public key is not needed until the final decryption is
      calculated.

   Verifiers MUST ignore any DKIM-Signature header fields where the
   signature does not validate.  Verifiers that are prepared to validate
   multiple signature header fields SHOULD proceed to the next signature
   header field, should it exist.  However, verifiers MAY make note of
   the fact that an invalid signature was present for consideration at a
   later step.

      INFORMATIVE NOTE:  The rationale of this requirement is to permit
      messages that have invalid signatures but also a valid signature
      to work.  For example, a mailing list exploder might opt to leave
      the original submitter signature in place even though the exploder
      knows that it is modifying the message in some way that will break
      that signature, and the exploder inserts its own signature.  In
      this case the message should succeed even in the presence of the
      known-broken signature.

   If a body length is specified in the "l=" tag of the signature,
   verifiers MUST only verify the number of bytes indicated in the body
   length.  Verifiers MAY decide that a message containing bytes beyond
   the indicated body length MAY still treat such a message as
   suspicious.  Verifiers MAY truncate the message at the indicated body
   length or reject the message outright.  MUAs MAY visually mark the
   unverified part of the body in a distinctive font or color to the end
   user.





Allman, et al.          Expires January 10, 2006               [Page 32]


Internet-Draft                    DKIM                         July 2005


6.5  Apply Sender Signing Policy

   Verifiers MUST consult the Sender Signing Policy as described in [ID-
   DKPOLICY] and act accordingly.  The range of possibilities is up to
   the verifier, but it MAY include rejecting the email.

6.6  Interpret Results/Apply Local Policy

   It is beyond the scope of this specification to describe what actions
   a verifier system should make, but an authenticated email presents an
   opportunity to a receiving system that unauthenticated email cannot.
   Specifically, an authenticated email creates a predictable identifier
   by which other decisions can reliably be managed, such as trust and
   reputation.  Conversely, unauthenticated email lacks a reliable
   identifier that can be used to assign trust and reputation.  It is
   reasonable to treat unauthenticated email as lacking any trust and
   having no positive reputation.

   If the verifying MTA is capable of verifying the public key of the
   signer and check the signature on the message synchronously with the
   SMTP session and such signature is missing or does not verify, the
   MTA MAY reject the message with an error such as:  550 5.7.1 Unsigned
   messages not accepted 550 5.7.5 Message signature incorrect

   If it is not possible to verify the authorization of the public key
   in the message, perhaps because the key server is not available, a
   temporary failure message MAY be generated, such as:  451 4.7.5
   Unable to verify signature - key server unavailable

   Once the signature has been verified, that information MUST be
   conveyed to higher level systems (such as explicit allow/white lists
   and reputation systems) and/or to the end user.  If the
   authentication status is to be stored in the message header field,
   the Authentication-Results header field [ID-AUTH-RES] SHOULD be used
   to convey this information.  If the message is signed on behalf of
   any address other than that in the From:  header field, the mail
   system SHOULD take pains to ensure that the actual signing identity
   is clear to the reader.

   The verifier MAY treat unsigned header fields with extreme
   skepticism, including marking them as untrusted or even deleting them
   before display to the end user.

   While the symptoms of a failed verification are obvious -- the
   signature doesn't verify -- establishing the exact cause can be more
   difficult.  If a selector cannot be found, is that because the
   selector has been removed or was the value changed somehow in
   transit?  If the signature line is missing is that because it was



Allman, et al.          Expires January 10, 2006               [Page 33]


Internet-Draft                    DKIM                         July 2005


   never there, or was it removed by an over-zealous filter?  For
   diagnostic purposes, the exact reason why the verification fails
   SHOULD be recorded in the "Authentication-Results" header field and
   possibly the system logs.  However in terms of presentation to the
   end user, the result SHOULD be presented as a simple binary result:
   either the email is verified or it is not.  If the email cannot be
   verified, then it SHOULD be rendered the same as all unverified email
   regardless of whether it looks like it was signed or not.

   Insert the Authentication-Results header field.  That header field is
   described in [ID-AUTH-RES].  The Authentication-Results header field
   SHOULD be inserted before any existing DKIM-Signature or
   Authentication-Results header fields in the header field block.

      INFORMATIVE ADVICE to MUA filter writers:

      Patterns intended to search for Authentication-Results header
      fields to visibly mark authenticated mail for end users should
      verify that the Authentication-Results header field was added by
      the appropriate verifying domain and that the verified identity
      matches the sender identity that will be displayed by the MUA.  In
      particular, MUA patterns should not be influenced by bogus
      Authentication-Results header fields added by attackers.

   In order to retain the current semantics and visibility of the From
   header field, verifying mail agents SHOULD take steps to ensure that
   the signing address is prominently visible to the user if it is
   different from the From address.  If MUA implementations that
   highlight the signed address are not available, this MAY be done by
   the validating MTA or MDA by rewriting the From address in a manner
   which remains compliant with [RFC2822].  If performed, the rewriting
   SHOULD include the name of the signer in the address.  For example:


   From: John Q. User <user@example.com>


   might be converted to


   From: "John Q. User via <asrg-admin@ietf.org>" <user@example.com>


   This sort of address inconsistency is expected for mailing lists, but
   might be otherwise used to mislead the verifier, for example if a
   message supposedly from administration@your-bank.com had a Sender
   address of fraud@badguy.com.




Allman, et al.          Expires January 10, 2006               [Page 34]


Internet-Draft                    DKIM                         July 2005


   Under no circumstances should an unsigned header field be displayed
   in any context that might be construed by the end user as having been
   signed.  Notably, unsigned header fields SHOULD be hidden from the
   end user to the extent possible.

7.  Compliance

   Placeholder for Phillip H-B's suggested compliance section:

   5) there should be a compliance section.  I think that the spec
   should say what it takes for an email sender, recipient and MTA to
   comply with the spec in one place.  In particular I think that
   somewhere there needs to be the statement that an SMTP forwarder is
   compliant with this spec IFF all messages that bear a signature are
   forwarded in a manner that preserves each of the canonicalization
   mechanisms specified.

8.  IANA Considerations

   Use of the _domainkey prefix in DNS records will require registration
   by IANA.

   The DKK and DKP RR types must be registered by IANA.

9.  Security Considerations

   It has been observed that any mechanism that is introduced which
   attempts to stem the flow of spam is subject to intensive attack.
   DKIM needs to be carefully scrutinized to identify potential attack
   vectors and the vulnerability to each.

9.1  Misuse of Body Length Limits ("l=" Tag)

   Body length limits (in the form of the "l=" tag) are subject to
   several potential attacks.

9.1.1  Addition of new MIME parts to multipart/*

   If the body length limit does not cover a closing MIME multipart
   header field (including the trailing "--CRLF" portion), then it is
   possible for an attacker to intercept a properly signed multipart
   message and add a new body part.  Depending on the details of the
   MIME type and the implementation of the verifying MTA and the
   receiving MUA, this could allow an attacker to change the information
   displayed to an end user from an apparently trusted source.

   *** Example appropriate here ***




Allman, et al.          Expires January 10, 2006               [Page 35]


Internet-Draft                    DKIM                         July 2005


9.1.2  Addition of new HTML content to existing content

   Several receiving MUA implementations do not cease display after a
   "</html>" tag.  In particular, this allows attacks involving
   overlaying images on top of existing text.

      INFORMATIVE EXAMPLE:  Appending the following text to an existing,
      properly closed message will in many MUAs result in inappropriate
      data being rendered on top of existing, correct data:


   <div style="position: relative; bottom: 350px; z-index: 2;">
   <img src="http://www.ietf.org/images/ietflogo2e.gif"
     width=578 height=370>
   </div>



9.2  Misappropriated Private Key

   If the private key for a user is resident on their computer and is
   not protected by an appropriately secure passphrase, it is possible
   for malware to send mail as that user.  The malware would, however,
   not be able to generate signed spoofs of other signers' addresses,
   which would aid in identification of the infected user and would
   limit the possibilities for certain types of attacks involving
   socially-engineered messages.

   A larger problem occurs if malware on many users' computers obtains
   the private keys for those users and transmits them via a covert
   channel to a site where they can be shared.  The compromised users
   would likely not know of the misappropriation until they receive
   "bounce" messages from messages they are supposed to have sent.  Many
   users might not understand the significance of these bounce messages
   and would not take action.

   One countermeasure is to use a passphrase, although users tend to
   choose weak passphrases and often reuse them for different purposes,
   possibly allowing an attack against DKIM to be extended into other
   domains.  Nevertheless, the decoded private key might be briefly
   available to compromise by malware when it is entered, or might be
   discovered via keystroke logging.  The added complexity of entering a
   passphrase each time one sends a message would also tend to
   discourage the use of a secure passphrase.

   A somewhat more effective countermeasure is to send messages through
   an outgoing MTA that can authenticate the sender and will sign the
   message using its key which is normally authorized for all addresses



Allman, et al.          Expires January 10, 2006               [Page 36]


Internet-Draft                    DKIM                         July 2005


   in the domain.  Such an MTA can also apply controls on the volume of
   outgoing mail each user is permitted to originate in order to further
   limit the ability of malware to generate bulk email.

9.3  Key Server Denial-of-Service Attacks

   Since the key servers are distributed (potentially separate for each
   domain), the number of servers that would need to be attacked to
   defeat this mechanism on an Internet-wide basis is very large.
   Nevertheless, key servers for individual domains could be attacked,
   impeding the verification of messages from that domain.  This is not
   significantly different from the ability of an attacker to deny
   service to the mail exchangers for a given domain, although it
   affects outgoing, not incoming, mail.

   A variation on this attack is that if a very large amount of mail
   were to be sent using spoofed addresses from a given domain, the key
   servers for that domain could be overwhelmed with requests.  However,
   given the low overhead of verification compared with handling of the
   email message itself, such an attack would be difficult to mount.

9.4  Attacks Against DNS

   Since DNS is a required binding for key services, specific attacks
   against DNS must be considered.

   While the DNS is currently insecure [RFC3833], it is expected that
   the security problems should and will be solved by DNSSEC [RFC4033],
   and all users of the DNS will reap the benefit of that work.

   Secondly, the types of DNS attacks relevant to DKIM are very costly
   and are far less rewarding than DNS attacks on other Internet
   applications.

   To systematically thwart the intent of DKIM, an attacker must conduct
   a very costly and very extensive attack on many parts of the DNS over
   an extended period.  No one knows for sure how attackers will
   respond, however the cost/benefit of conducting prolonged DNS attacks
   of this nature is expected to be uneconomical.

   Finally, DKIM is only intended as a "sufficient" method of proving
   authenticity.  It is not intended to provide strong cryptographic
   proof about authorship or contents.  Other technologies such as
   OpenPGP [RFC2440] and S/MIME [RFC2633] address those requirements.

   A second security issue related to the DNS revolves around the
   increased DNS traffic as a consequence of fetching Selector-based
   data as well as fetching signing domain policy.  Widespread



Allman, et al.          Expires January 10, 2006               [Page 37]


Internet-Draft                    DKIM                         July 2005


   deployment of DKIM will result in a significant increase in DNS
   queries to the claimed signing domain.  In the case of forgeries on a
   large scale, DNS servers could see a substantial increase in queries.

9.5  Replay Attacks

   In this attack, a spammer sends a message to be spammed to an
   accomplice, which results in the message being signed by the
   originating MTA.  The accomplice resends the message, including the
   original signature, to a large number of recipients, possibly by
   sending the message to many compromised machines that act as MTAs.
   The messages, not having been modified by the accomplice, have valid
   signatures.

   Partial solutions to this problem involve the use of reputation
   services to convey the fact that the specific email address is being
   used for spam, and that messages from that signer are likely to be
   spam.  This requires a real-time detection mechanism in order to
   react quickly enough.  However, such measures might be prone to
   abuse, if for example an attacker resent a large number of messages
   received from a victim in order to make them appear to be a spammer.

   Large verifiers might be able to detect unusually large volumes of
   mails with the same signature in a short time period.  Smaller
   verifiers can get substantially the same volume information via
   existing collaborative systems.

9.6  Limits on Revoking Key Authorization

   When a large domain detects undesirable behavior on the part of one
   of its users, it might wish to revoke the key used to sign that
   user's messages in order to disavow responsibility for messages which
   have not yet been verified or which are the subject of a replay
   attack.  However, the ability of the domain to do so can be limited
   if the same key, for scalability reasons, is used to sign messages
   for many other users.  Mechanisms for explicitly revoking key
   authorization on a per-address basis have been proposed but require
   further study as to their utility and the DNS load they represent.

9.7  Intentionally malformed Key Records

   It is possible for an attacker to publish key records in DNS which
   are intentionally malformed, with the intent of causing a denial-of-
   service attack on a non-robust verifier implementation.  The attacker
   could then cause a verifier to read the malformed key record by
   sending a message to one of its users referencing the malformed
   record in a (not necessarily valid) signature.  Verifiers MUST
   thoroughly verify all key records retrieved from DNS and be robust



Allman, et al.          Expires January 10, 2006               [Page 38]


Internet-Draft                    DKIM                         July 2005


   against intentionally as well as unintentionally malformed key
   records.

9.8  Intentionally Malformed DKIM-Signature header fields

   Verifiers MUST be prepared to receive messages with malformed DKIM-
   Signature header fields, and thoroughly verify the header field
   before depending on any of its contents.

10.  References

10.1  References -- Normative

   [ID-AUTH-RES]
              Kucherawy, M., "Message header field for Indicating Sender
              Authentication Status", draft-kucherawy-sender-auth-header
              field-02 (work in progress), 2005.

   [ID-DK-RR]
              "[*] dk rr", draft-dkk-rr-xx (work in progress), 2005.

   [ID-DKPOLICY]
              "[*] dk policy", draft-allman-dkim-policy (work in
              progress), 2005.

   [ID-MAIL-ARCH]
              Crocker, D., "Internet Mail Architecture",
              draft-crocker-email-arch-02 (work in progress),
              April 2005.

   [OPENSSL]  Team, C&D., "", WEB http://www.openssl.org/docs/,
              June 2005.

   [RFC1421]  Linn, J., "Privacy Enhancement for Internet Electronic
              Mail: Part I: Message Encryption and Authentication
              Procedures", RFC 1421, February 1993.

   [RFC2045]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part One: Format of Internet Message
              Bodies", RFC 2045, November 1996.

   [RFC2047]  Moore, K., "MIME (Multipurpose Internet Mail Extensions)
              Part Three: Message header field Extensions for Non-ASCII
              Text", RFC 2047, November 1996.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.




Allman, et al.          Expires January 10, 2006               [Page 39]


Internet-Draft                    DKIM                         July 2005


   [RFC2234]  Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", RFC 2234, November 1997.

   [RFC2822]  Resnick, P., "Internet Message Format", RFC 2822,
              April 2001.

   [RFC3447]  Jonsson, J. and B. Kaliski, "Public-Key Cryptography
              Standards (PKCS) #1: RSA Cryptography Specifications
              Version 2.1", RFC 3447, February 2003.

   [RFC3491]  Hoffman, P. and M. Blanchet, "[*] Nameprep: A Stringprep
              Profile for Internationalized Domain Names (IDN)",
              RFC 3491, March 2003.

10.2  References -- Informative

   [RFC1847]  Galvin, J., Murphy, S., Crocker, S., and N. Freed,
              "Security Multiparts for MIME: Multipart/Signed and
              Multipart/Encrypted", RFC 1847, October 1995.

   [RFC2440]  Callas, J., Donnerhacke, L., Finney, H., and R. Thayer,
              "OpenPGP Message Format", RFC 2440, November 1998.

   [RFC2633]  Ramsdell, B., "S/MIME Version 3 Message Specification",
              RFC 2633, June 1999.

   [RFC3833]  Atkins, D. and R. Austein, "Threat Analysis of the Domain
              Name System (DNS)", RFC 3833, August 2004.

   [RFC4033]  Arends, R., Austein, R., Larson, M., Massey, D., and S.
              Rose, "DNS Security Introduction and Requirements",
              RFC 4033, March 2005.


Authors' Addresses

   Eric Allman
   Sendmail, Inc.
   6425 Christie Ave, Suite 400
   Emeryville, CA  94608
   USA

   Phone:  +1 510 594 5501
   Email:  eric+dkim@sendmail.org
   URI:






Allman, et al.          Expires January 10, 2006               [Page 40]


Internet-Draft                    DKIM                         July 2005


   Jon Callas
   PGP Corporation
   3460 West Bayshore
   Palo Alto, CA  94303
   USA

   Phone:  +1 650 319 9016
   Email:  jon@pgp.com


   Mark Delany
   Yahoo! Inc
   701 First Avenue
   Sunnyvale, CA  95087
   USA

   Phone:  +1 408 349 6831
   Email:  markd+dkim@yahoo-inc.com
   URI:


   Miles Libbey
   Yahoo! Inc
   701 First Avenue
   Sunnyvale, CA  95087
   USA

   Email:  mlibbeymail-mailsig@yahoo.com
   URI:


   Jim Fenton
   Cisco Systems, Inc.
   MS SJ-24/2
   170 W. Tasman Drive
   San Jose, CA  95134-1706
   USA

   Phone:  +1 408 526 5914
   Email:  fenton@cisco.com
   URI:










Allman, et al.          Expires January 10, 2006               [Page 41]


Internet-Draft                    DKIM                         July 2005


   Michael Thomas
   Cisco Systems, Inc.
   MS SJ-9/2
   170 W. Tasman Drive
   San Jose, CA  95134-1706

   Phone:  +1 408 525 5386
   Email:  mat@cisco.com

Appendix A.  Appendix A -- Usage Examples (INFORMATIVE)

   This section taken directly from IIM without serious editing; it
   should be updated or deleted before publication.  In no case should
   these examples be used as guidance when creating an implementation.

A.1  Simple message transfer

   The above sections largely describe the process of signing and
   verifying a message which goes directly from one user to another.
   One special case is where the recipient has requested forwarding of
   the email message from the original address to another, through the
   use of a Unix .forward file or equivalent.  In this case the message
   is typically forwarded without modification, except for the addition
   of a Received header field to the message and a change in the
   Envelope-to address.  In this case, the eventual recipient should be
   able to verify the original signature since the signed content has
   not changed, and attribute the message correctly.

A.2  Outsourced business functions

   Outsourced business functions represent a use case that motivates the
   need for user-level keying.  Examples of outsourced business
   functions are legitimate email marketing providers and corporate
   benefits providers.  In either case, the outsourced function would
   like to be able to send messages using the email domain of the client
   company.  At the same time, the client may be reluctant to register a
   key for the provider that grants the ability to send messages for any
   address in the domain.

   With user-level keying, the outsourcing company can generate a
   keypair and the client company can register the public key for a
   specific address such as promotions@example.com.  This would enable
   the provider to send messages using that specific address and have
   them verify properly.  The client company retains control over the
   email address because it retains the authority to revoke the key
   registration at any time.





Allman, et al.          Expires January 10, 2006               [Page 42]


Internet-Draft                    DKIM                         July 2005


A.3  PDAs and Similar Devices

   PDAs are one example of the use of multiple keys per user.  Suppose
   that John Doe wanted to be able to send messages using his corporate
   email address, jdoe@example.com, and the device did not have the
   ability to make a VPN connection to the corporate network.  If the
   device was equipped with a private key registered for
   jdoe@example.com by the administrator of that domain, and appropriate
   software to sign messages, John could send IIM messages through the
   outgoing network of the PDA service provider.

A.4  Mailing Lists

   There is a wide range of behavior in forwarders and mailing lists
   (collectively called "forwarders" below), ranging from those which
   make no modification to the message itself (other than to add a
   Received header field and change the envelope information) to those
   which may add header fields, change the Subject header field, add
   content to the body (typically at the end), or reformat the body in
   some manner.

   Forwarders which do not modify the body or signed header fields of a
   message with a valid signature MAY re-sign the message as described
   below.

   Forwarders which make any modification to a message that could result
   in its signature becoming invalid SHOULD sign or re-sign using an
   appropriate identification (e.g., mailing-list-name@example.net).
   Since in so doing the (re-)signer is taking responsibility for the
   content of the message, modifying forwarders MAY elect to forward or
   re-sign only for messages which were received with valid signatures
   or other indications that the messages being signed are not spoofed.

   Forwarders which wish to re-sign a message MUST apply a Sender header
   field to the message to identify the address being used to sign the
   message and MUST remove any preexisting Sender header field as
   required by RFC 2822 [5].  The forwarder applies a new IIM-Sig header
   field with the signature, public key, and related information of the
   forwarder.  Previously existing IIM-Sig header fields SHOULD NOT be
   removed.

A.5  Affinity Addresses

   "Affinity addresses" are email addresses that users employ to have an
   email address that is independent of any changes in email service
   provider they may choose to make.  They are typically associated with
   college alumni associations, professional organizations, and
   recreational organizations with which they expect to have a long-term



Allman, et al.          Expires January 10, 2006               [Page 43]


Internet-Draft                    DKIM                         July 2005


   relationship.  These domains usually provide forwarding of incoming
   email, but (currently) usually depend on the user to send outgoing
   messages through their own service provider's MTA.  They usually have
   an associated Web application which authenticates the user and allows
   the forwarding address to be changed.

   With DKIM, affinity domains could use the Web application to allow
   users to register their own public keys to be used to sign messages
   on behalf of their affinity address.  This is another application
   that takes advantage of user-level keying, and domains used for
   affinity addresses would typically have a very large number of user-
   level keys.  Alternatively, the affinity domain could decide to start
   handling outgoing mail, and could operate a mail submission agent
   that authenticates users before accepting and signing messages for
   them.  This is of course dependent on the user's service provider not
   blocking the relevant TCP ports used for mail submission.

A.6  Third-party Message Transmission

   Third-party message transmission refers to the authorized sending of
   mail by an Internet application on behalf of a user.  For example, a
   website providing news may allow the reader to forward a copy of the
   message to a friend; this is typically done using the reader's email
   address.  This is sometimes referred to as the "Evite problem", named
   after the website of the same name that allows a user to send
   invitations to friends.

   One way this can be handled is to continue to put the reader's email
   address in the From field of the message, but put an address owned by
   the site into the Sender field, and sign the message on behalf of the
   Sender.  A verifying MTA SHOULD accept this and rewrite the From
   field to indicate the address that was verified, i.e., From:  John
   Doe via news@news-site.com <jdoe@example.com>.

Appendix B.  Appendix B -- Example of Use (INFORMATIVE)

   This section taken directly from DK without serious editing; it
   should be updated or deleted before publication.  In no case should
   these examples be used as guidance when creating an implementation.

   This section shows the complete flow of an email from submission to
   final delivery, demonstrating how the various components fit
   together.

B.1  The user composes an email






Allman, et al.          Expires January 10, 2006               [Page 44]


Internet-Draft                    DKIM                         July 2005




   From: "Joe SixPack" <joe@football.example.com>
   To: "Suzie Q" <suzie@shopping.example.net>
   Subject: Is dinner ready?
   Date: Fri, 11 Jul 2003 21:00:37 -0700 (PDT)
   Message-ID: <20030712040037.46341.5F8J@football.example.com>

   Hi.

   We lost the game. Are you hungry yet?

               Joe.



B.2  The email is signed

   This email is signed by the example.com outbound email server and now
   looks like this:


   DKIM-Signature: a=rsa-sha1; s=brisbane; d=example.com;
         c=simple; q=dns; i=joe@football.example.com;
         h=Received : From : To : Subject : Date : Message-ID;
         b=dzdVyOfAKCdLXdJOc9G2q8LoXSlEniSbav+yuU4zGeeruD00lszZ
           VoG4ZHRNiYzR;
   Received: from dsl-10.2.3.4.football.example.com  [10.2.3.4]
         by submitserver.example.com with SUBMISSION;
         Fri, 11 Jul 2003 21:01:54 -0700 (PDT)
   From: "Joe SixPack" <joe@football.example.com>
   To: "Suzie Q" <suzie@shopping.example.net>
   Subject: Is dinner ready?
   Date: Fri, 11 Jul 2003 21:00:37 -0700 (PDT)
   Message-ID: <20030712040037.46341.5F8J@football.example.com>

   Hi.

   We lost the game. Are you hungry yet?

        Joe.


   The signing email server requires access to the private-key
   associated with the "brisbane" selector to generate this signature.
   Distribution and management of private-keys is outside the scope of
   this document.




Allman, et al.          Expires January 10, 2006               [Page 45]


Internet-Draft                    DKIM                         July 2005


B.3  The email signature is verified

   The signature is normally verified by an inbound SMTP server or
   possibly the final delivery agent.  However, intervening MTAs can
   also perform this verification if they choose to do so.  The
   verification process uses the domain "example.com" extracted from the
   "d=" header field and the selector "brisbane" from the "s=" tag in
   the "DKIM-Signature" header field to form the DNS DKIM query for:


   brisbane._dkim.example.com


   Signature verification starts with the physically last "Received"
   header field, the "From" header field, and so forth, in the order
   listed in the "h=" tag.  Verification follows with a single CRLF
   followed by the body (starting with "Hi.").  The email is canonically
   prepared for verifying with the "simple" method.  The result of the
   query and subsequent verification of the signature is stored in the
   "Authentication-Results" header field line.  After successful
   verification, the email looks like this:


   Authentication-Status: XXX
   Received: from mout23.football.example.com (192.168.1.1)
                 by shopping.example.net with SMTP;
                 Fri, 11 Jul 2003 21:01:59 -0700 (PDT)
   DKIM-Signature: a=rsa-sha1; s=brisbane; d=example.net;
          c=simple; q=dns; i=joe@football.example.com;
          h=Received : From : To : Subject : Date : Message-ID;
          b=dzdVyOfAKCdLXdJOc9G2q8LoXSlEniSbav+yuU4zGeeruD00lszZ
             VoG4ZHRNiYzR
   Received: from dsl-10.2.3.4.network.example.com  [10.2.3.4]
            by submitserver.example.com with SUBMISSION;
            Fri, 11 Jul 2003 21:01:54 -0700 (PDT)
   From: "Joe SixPack" <joe@football.example.com>
   To: "Suzie Q" <suzie@shopping.example.net>
   Subject: Is dinner ready?
   Date: Fri, 11 Jul 2003 21:00:37 -0700 (PDT)
   Message-ID: <20030712040037.46341.5F8J@football.example.com>

   Hi.

   We lost the game. Are you hungry yet?

        Joe.





Allman, et al.          Expires January 10, 2006               [Page 46]


Internet-Draft                    DKIM                         July 2005


Appendix C.  Appendix C -- Creating a public key (INFORMATIVE)

   Drop this section?  It seems like this could clarify things for some
   people.

   The default signature is an RSA signed SHA1 digest of the complete
   email.  For ease of explanation, the openssl command is used to
   describe the mechanism by which keys and signatures are managed.  One
   way to generate a 768 bit private-key suitable for DKIM, is to use
   openssl like this:


   $ openssl genrsa -out rsa.private 768


   This results in the file rsa.private containing the key information
   similar to this:


   -----BEGIN RSA PRIVATE KEY-----
   MIIByQIBAAJhAKJ2lzDLZ8XlVambQfMXn3LRGKOD5o6lMIgulclWjZwP56LRqdg5
   ZX15bhc/GsvW8xW/R5Sh1NnkJNyL/cqY1a+GzzL47t7EXzVc+nRLWT1kwTvFNGIo
   AUsFUq+J6+OprwIDAQABAmBOX0UaLdWWusYzNol++nNZ0RLAtr1/LKMX3tk1MkLH
   +Ug13EzB2RZjjDOWlUOY98yxW9/hX05Uc9V5MPo+q2Lzg8wBtyRLqlORd7pfxYCn
   Kapi2RPMcR1CxEJdXOkLCFECMQDTO0fzuShRvL8q0m5sitIHlLA/L+0+r9KaSRM/
   3WQrmUpV+fAC3C31XGjhHv2EuAkCMQDE5U2nP2ZWVlSbxOKBqX724amoL7rrkUew
   ti9TEjfaBndGKF2yYF7/+g53ZowRkfcCME/xOJr58VN17pejSl1T8Icj88wGNHCs
   FDWGAH4EKNwDSMnfLMG4WMBqd9rzYpkvGQIwLhAHDq2CX4hq2tZAt1zT2yYH7tTb
   weiHAQxeHe0RK+x/UuZ2pRhuoSv63mwbMLEZAjAP2vy6Yn+f9SKw2mKuj1zLjEhG
   6ppw+nKD50ncnPoP322UMxVNG4Eah0GYJ4DLP0U=
             -----END RSA PRIVATE KEY-----


   Once a private-key has been generated, the openssl command can be
   used to sign an appropriately prepared email, like this:


   $ openssl dgst -sign rsa.private -sha1 <input.file


   This results in signature data similar to this when represented in
   Base64 [MIME] format:


   aoiDeX42BB/gP4ScqTdIQJcpAObYr+54yvctqc4rSEFYby9+omKD3pJ/TVxATeTz msybuW3WZiamb+mvn7f3rhmnozHJ0yORQbnn4qJQhPbbPbWEQKW09AMJbyz/0lsl


   How this signature is added to the email is discussed later in this



Allman, et al.          Expires January 10, 2006               [Page 47]


Internet-Draft                    DKIM                         July 2005


   document.  To extract the public-key component from the private-key,
   use openssl like this:


   $ openssl rsa -in rsa.private -out rsa.public -pubout -outform PEM


   This results in the file rsa.public containing the key information
   similar to this:


   -----BEGIN PUBLIC KEY-----
   MHwwDQYJKoZIhvcNAQEBBQADawAwaAJhAKJ2lzDLZ8XlVambQfMXn3LRGKOD5o6l
   MIgulclWjZwP56LRqdg5ZX15bhc/GsvW8xW/R5Sh1NnkJNyL/cqY1a+GzzL47t7E
   XzVc+nRLWT1kwTvFNGIoAUsFUq+J6+OprwIDAQAB
             -----END PUBLIC KEY-----


   This public-key data (without the BEGIN and END tags) is placed in
   the DNS.  With the signature, canonical email contents and public
   key, a verifying system can test the validity of the signature.  The
   openssl invocation to verify a signature looks like this:  openssl
   dgst -verify rsa.public -sha1 -signature signature.file <input.file

Appendix D.  Glossary


Appendix E.  Acknowledgements

   The authors wish to thank Russ Allbery, Edwin Aoki, Claus Asmann,
   Steve Atkins, Fred Baker, Mark Baugher, Nathaniel Borenstein, Dave
   Crocker, Michael Cudahy, Dennis Dayman, Jutta Degener, Patrik
   Faltstrom, Duncan Findlay, Elliot Gillum, Phillip Hallam-Baker, Tony
   Hansen, Arvel Hathcock, Don Johnsen, Harry Katz, Murray S. Kucherawy,
   Barry Leiba, John Levine, Simon Longsdale, David Margrave, Justin
   Mason, David Mayne, Russell Nelson, Dave Oran, Shamim Pirzada, Juan
   Altmayer Pizzorno, Sanjay Pol, Blake Ramsdell, Christian Renaud,
   Scott Renfro, Dave Rossetti, the Spamhaus.org team, Malte S. Stretz,
   Robert Sanders, Rand Wacker, and Dan Wing for their valuable
   suggestions and constructive criticism.

   The DomainKeys specification was a primary source from which this
   specification has been derived.  Further information about DomainKeys
   is at
   <http://domainkeys.sourceforge.net/license/patentlicense1-1.html>.






Allman, et al.          Expires January 10, 2006               [Page 48]


Internet-Draft                    DKIM                         July 2005


Intellectual Property Statement

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

   The IETF has been notified of intellectual property rights claimed in
   regard to some or all of the specification contained in this
   document.  For more information consult the online list of claimed
   rights.


Disclaimer of Validity

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Copyright Statement

   Copyright (C) The Internet Society (2005).  This document is subject
   to the rights, licenses and restrictions contained in BCP 78, and
   except as set forth therein, the authors retain all their rights.





Allman, et al.          Expires January 10, 2006               [Page 49]


Internet-Draft                    DKIM                         July 2005


Acknowledgment

   Funding for the RFC Editor function is currently provided by the
   Internet Society.















































Allman, et al.          Expires January 10, 2006               [Page 50]


Html markup produced by rfcmarkup 1.123, available from https://tools.ietf.org/tools/rfcmarkup/